Givet et positivt heltal, skriv en funktion, der returnerer sand, hvis det givne tal er et palindrom, ellers falsk. For eksempel er 12321 et palindrom, men 1451 er ikke et palindrom.
Anbefalet praksis Sum af ciffer er Pallindrom eller ej Prøv det!
Metode 1:
Lad det givne tal være på en . En simpel metode til dette problem er først omvendte cifre af på en , og sammenlign derefter det modsatte af på en med på en . Hvis begge er ens, så returner sand, ellers falsk.
Følgende er en interessant metode inspireret af metode #2 af det her stolpe. Ideen er at lave en kopi af på en og rekursivt videregive kopien ved reference, og bestå på en efter værdi. I de rekursive opkald skal du dividere på en med 10, mens du bevæger dig ned ad rekursionstræet. Mens du bevæger dig op i rekursionstræet, divider du kopien med 10. Når de mødes i en funktion, hvor alle underordnede opkald er slut, vil det sidste ciffer af på en vil være ith ciffer fra begyndelsen, og det sidste ciffer i kopien vil være ith ciffer fra slutningen.
C++
// A recursive C++ program to check> // whether a given number> // is palindrome or not> #include> using> namespace> std;> > // A function that returns true only> // if num contains one> // digit> int> oneDigit(>int> num)> {> > >// Comparison operation is faster> >// than division> >// operation. So using following> >// instead of 'return num> >// / 10 == 0;'> >return> (num>= 0 && antal<10);> }> > // A recursive function to find> // out whether num is> // palindrome or not. Initially, dupNum> // contains address of> // a copy of num.> bool> isPalUtil(>int> num,>int>* dupNum)> {> > >// Base case (needed for recursion> >// termination): This> >// statement mainly compares the> >// first digit with the> >// last digit> >if> (oneDigit(num))> >return> (num == (*dupNum) % 10);> > >// This is the key line in this> >// method. Note that all> >// recursive calls have a separate> >// copy of num, but they> >// all share same copy of *dupNum.> >// We divide num while> >// moving up the recursion tree> >if> (!isPalUtil(num / 10, dupNum))> >return> false>;> > >// The following statements are> >// executed when we move up> >// the recursion call tree> >*dupNum /= 10;> > >// At this point, if num%10 contains> >// i'th digit from> >// beginning, then (*dupNum)%10> >// contains i'th digit> >// from end> >return> (num % 10 == (*dupNum) % 10);> }> > // The main function that uses> // recursive function> // isPalUtil() to find out whether> // num is palindrome or not> int> isPal(>int> num)> {> > >// Check if num is negative,> >// make it positive> >if> (num <0)> >num = -num;> > >// Create a separate copy of num,> >// so that modifications> >// made to address dupNum don't> >// change the input number.> >// *dupNum = num> >int>* dupNum =>new> int>(num);> > >return> isPalUtil(num, dupNum);> }> > // Driver program to test> // above functions> int> main()> {> >int> n = 12321;> >isPal(n) ? cout <<>'Yes
'>: cout <<>'No'> << endl;> > >n = 12;> >isPal(n) ? cout <<>'Yes
'>: cout <<>'No'> << endl;> > >n = 88;> >isPal(n) ? cout <<>'Yes
'>: cout <<>'No'> << endl;> > >n = 8999;> >isPal(n) ? cout <<>'Yes
'>: cout <<>'No'>;> >return> 0;> }> > // this code is contributed by shivanisinghss2110> |
>
>
C
#include> #include> > // A function that returns true only> // if num contains one digit> int> oneDigit(>int> num)> {> >// Comparison operation is faster> >// than division operation.> >// So using the following instead of 'return num / 10 == 0;'> >return> (num>= 0 && antal<10);> }> > // A recursive function to find out whether> // num is palindrome or not.> // Initially, dupNum contains the address of a copy of num.> bool> isPalUtil(>int> num,>int>* dupNum)> {> >// Base case (needed for recursion termination):> >// This statement mainly compares the first digit with the last digit.> >if> (oneDigit(num))> >return> (num == (*dupNum) % 10);> > >// This is the key line in this method.> >// Note that all recursive calls have a separate copy of num,> >// but they all share the same copy of *dupNum.> >// We divide num while moving up the recursion tree.> >if> (!isPalUtil(num / 10, dupNum))> >return> false>;> > >// The following statements are executed when we move up the recursion call tree.> >*dupNum /= 10;> > >// At this point, if num % 10 contains the i'th digit from the beginning,> >// then (*dupNum) % 10 contains the i'th digit from the end.> >return> (num % 10 == (*dupNum) % 10);> }> > // The main function that uses the recursive function> // isPalUtil() to find out whether num is palindrome or not.> bool> isPal(>int> num)> {> >// Check if num is negative, make it positive.> >if> (num <0)> >num = -num;> > >// Create a separate copy of num, so that modifications> >// made to the address dupNum don't change the input number.> >int> dupNum = num;> > >return> isPalUtil(num, &dupNum);> }> > // Driver program to test above functions> int> main()> {> >int> n = 12321;> >isPal(n) ?>printf>(>'Yes
'>) :>printf>(>'No
'>);> > >n = 12;> >isPal(n) ?>printf>(>'Yes
'>) :>printf>(>'No
'>);> > >n = 88;> >isPal(n) ?>printf>(>'Yes
'>) :>printf>(>'No
'>);> > >n = 8999;> >isPal(n) ?>printf>(>'Yes
'>) :>printf>(>'No
'>);> > >return> 0;> }> |
>
>
Java
// A recursive Java program to> // check whether a given number> // is palindrome or not> import> java.io.*;> import> java.util.*;> > public> class> CheckPalindromeNumberRecursion {> > >// A function that returns true> >// only if num contains one digit> >public> static> int> oneDigit(>int> num) {> > >if> ((num>=>0>) && (num <>10>))> >return> 1>;> >else> >return> 0>;> >}> > >public> static> int> isPalUtil> >(>int> num,>int> dupNum)>throws> Exception {> > >// base condition to return once we> >// move past first digit> >if> (num ==>0>) {> >return> dupNum;> >}>else> {> >dupNum = isPalUtil(num />10>, dupNum);> >}> > >// Check for equality of first digit of> >// num and dupNum> >if> (num %>10> == dupNum %>10>) {> >// if first digit values of num and> >// dupNum are equal divide dupNum> >// value by 10 to keep moving in sync> >// with num.> >return> dupNum />10>;> >}>else> {> >// At position values are not> >// matching throw exception and exit.> >// no need to proceed further.> >throw> new> Exception();> >}> > >}> > >public> static> int> isPal(>int> num)> >throws> Exception {> > >if> (num <>0>)> >num = (-num);> > >int> dupNum = (num);> > >return> isPalUtil(num, dupNum);> >}> > >public> static> void> main(String args[]) {> > >int> n =>12421>;> >try> {> >isPal(n);> >System.out.println(>'Yes'>);> >}>catch> (Exception e) {> >System.out.println(>'No'>);> >}> >n =>1231>;> >try> {> >isPal(n);> >System.out.println(>'Yes'>);> >}>catch> (Exception e) {> >System.out.println(>'No'>);> >}> > >n =>12>;> >try> {> >isPal(n);> >System.out.println(>'Yes'>);> >}>catch> (Exception e) {> >System.out.println(>'No'>);> >}> > >n =>88>;> >try> {> >isPal(n);> >System.out.println(>'Yes'>);> >}>catch> (Exception e) {> >System.out.println(>'No'>);> >}> > >n =>8999>;> >try> {> >isPal(n);> >System.out.println(>'Yes'>);> >}>catch> (Exception e) {> >System.out.println(>'No'>);> >}> >}> }> > // This code is contributed> // by Nasir J> |
>
>
Python3
# A recursive Python3 program to check> # whether a given number is palindrome or not> > # A function that returns true> # only if num contains one digit> def> oneDigit(num):> > ># comparison operation is faster> ># than division operation. So> ># using following instead of> ># 'return num / 10 == 0;'> >return> ((num>>=> 0>)>and> >(num <>10>))> > # A recursive function to find> # out whether num is palindrome> # or not. Initially, dupNum> # contains address of a copy of num.> def> isPalUtil(num, dupNum):> > ># Base case (needed for recursion> ># termination): This statement> ># mainly compares the first digit> ># with the last digit> >if> oneDigit(num):> >return> (num>=>=> (dupNum[>0>])>%> 10>)> > ># This is the key line in this> ># method. Note that all recursive> ># calls have a separate copy of> ># num, but they all share same> ># copy of *dupNum. We divide num> ># while moving up the recursion tree> >if> not> isPalUtil(num>/>/>10>, dupNum):> >return> False> > ># The following statements are> ># executed when we move up the> ># recursion call tree> >dupNum[>0>]>=> dupNum[>0>]>/>/>10> > ># At this point, if num%10> ># contains i'th digit from> ># beginning, then (*dupNum)%10> ># contains i'th digit from end> >return> (num>%> 10> =>=> (dupNum[>0>])>%> 10>)> > # The main function that uses> # recursive function isPalUtil()> # to find out whether num is> # palindrome or not> def> isPal(num):> ># If num is negative,> ># make it positive> >if> (num <>0>):> >num>=> (>->num)> > ># Create a separate copy of> ># num, so that modifications> ># made to address dupNum> ># don't change the input number.> >dupNum>=> [num]># *dupNum = num> > >return> isPalUtil(num, dupNum)> > # Driver Code> n>=> 12321> if> isPal(n):> >print>(>'Yes'>)> else>:> >print>(>'No'>)> > n>=> 12> if> isPal(n) :> >print>(>'Yes'>)> else>:> >print>(>'No'>)> > n>=> 88> if> isPal(n) :> >print>(>'Yes'>)> else>:> >print>(>'No'>)> > n>=> 8999> if> isPal(n) :> >print>(>'Yes'>)> else>:> >print>(>'No'>)> > # This code is contributed by mits> |
>
>
C#
// A recursive C# program to> // check whether a given number> // is palindrome or not> using> System;> > class> GFG> {> > // A function that returns true> // only if num contains one digit> public> static> int> oneDigit(>int> num)> {> >// comparison operation is> >// faster than division> >// operation. So using> >// following instead of> >// 'return num / 10 == 0;'> >if>((num>= 0) &&(antal<10))> >return> 1;> >else> >return> 0;> }> > // A recursive function to> // find out whether num is> // palindrome or not.> // Initially, dupNum contains> // address of a copy of num.> public> static> int> isPalUtil(>int> num,> >int> dupNum)> {> >// Base case (needed for recursion> >// termination): This statement> >// mainly compares the first digit> >// with the last digit> >if> (oneDigit(num) == 1)> >if>(num == (dupNum) % 10)> >return> 1;> >else> >return> 0;> > >// This is the key line in> >// this method. Note that> >// all recursive calls have> >// a separate copy of num,> >// but they all share same> >// copy of *dupNum. We divide> >// num while moving up the> >// recursion tree> >if> (isPalUtil((>int>)(num / 10), dupNum) == 0)> >return> -1;> > >// The following statements> >// are executed when we move> >// up the recursion call tree> >dupNum = (>int>)(dupNum / 10);> > >// At this point, if num%10> >// contains i'th digit from> >// beginning, then (*dupNum)%10> >// contains i'th digit from end> >if>(num % 10 == (dupNum) % 10)> >return> 1;> >else> >return> 0;> }> > // The main function that uses> // recursive function isPalUtil()> // to find out whether num is> // palindrome or not> public> static> int> isPal(>int> num)> {> >// If num is negative,> >// make it positive> >if> (num <0)> >num = (-num);> > >// Create a separate copy> >// of num, so that modifications> >// made to address dupNum> >// don't change the input number.> >int> dupNum = (num);>// *dupNum = num> > >return> isPalUtil(num, dupNum);> }> > // Driver Code> public> static> void> Main()> {> int> n = 12321;> if>(isPal(n) == 0)> >Console.WriteLine(>'Yes'>);> else> >Console.WriteLine(>'No'>);> > n = 12;> if>(isPal(n) == 0)> >Console.WriteLine(>'Yes'>);> else> >Console.WriteLine(>'No'>);> > n = 88;> if>(isPal(n) == 1)> >Console.WriteLine(>'Yes'>);> else> >Console.WriteLine(>'No'>);> > n = 8999;> if>(isPal(n) == 0)> >Console.WriteLine(>'Yes'>);> else> >Console.WriteLine(>'No'>);> }> }> > // This code is contributed by mits> |
>
>
Javascript
> // A recursive javascript program to> // check whether a given number> // is palindrome or not> > >// A function that returns true> >// only if num contains one digit> >function> oneDigit(num) {> > >if> ((num>= 0) && (antal<10))> >return> 1;> >else> >return> 0;> >}> > >function> isPalUtil> >(num , dupNum) {> > >// base condition to return once we> >// move past first digit> >if> (num == 0) {> >return> dupNum;> >}>else> {> >dupNum = isPalUtil(parseInt(num / 10), dupNum);> >}> > >// Check for equality of first digit of> >// num and dupNum> >if> (num % 10 == dupNum % 10) {> >// if first digit values of num and> >// dupNum are equal divide dupNum> >// value by 10 to keep moving in sync> >// with num.> >return> parseInt(dupNum / 10);> >}>else> {> >// At position values are not> >// matching throw exception and exit.> >// no need to proceed further.> >throw> e;> >}> > >}> > >function> isPal(num)> >{> > >if> (num <0)> >num = (-num);> > >var> dupNum = (num);> > >return> isPalUtil(num, dupNum);> >}> > > > >var> n = 1242;> >try> {> >isPal(n);> >document.write(>' Yes'>);> >}>catch> (e) {> >document.write(>' No'>);> >}> >n = 1231;> >try> {> >isPal(n);> >document.write(>' Yes'>);> >}>catch> (e) {> >document.write(>' No'>);> >}> > >n = 12;> >try> {> >isPal(n);> >document.write(>' Yes'>);> >}>catch> (e) {> >document.write(>' No'>);> >}> > >n = 88;> >try> {> >isPal(n);> >document.write(>' Yes'>);> >}>catch> (e) {> >document.write(>' No'>);> >}> > >n = 8999;> >try> {> >isPal(n);> >document.write(>' Yes'>);> >}>catch> (e) {> >document.write(>' No'>);> >}> > // This code is contributed by Amit Katiyar> > |
>
>
PHP
// A recursive PHP program to // check whether a given number // is palindrome or not // A function that returns true // only if num contains one digit function oneDigit($num) { // comparison operation is faster // than division operation. So // using following instead of // 'return num / 10 == 0;' return (($num>= 0) && ($antal<10)); } // A recursive function to find // out whether num is palindrome // or not. Initially, dupNum // contains address of a copy of num. function isPalUtil($num, $dupNum) { // Base case (needed for recursion // termination): This statement // mainly compares the first digit // with the last digit if (oneDigit($num)) return ($num == ($dupNum) % 10); // This is the key line in this // method. Note that all recursive // calls have a separate copy of // num, but they all share same // copy of *dupNum. We divide num // while moving up the recursion tree if (!isPalUtil((int)($num / 10), $dupNum)) return -1; // The following statements are // executed when we move up the // recursion call tree $dupNum = (int)($dupNum / 10); // At this point, if num%10 // contains i'th digit from // beginning, then (*dupNum)%10 // contains i'th digit from end return ($num % 10 == ($dupNum) % 10); } // The main function that uses // recursive function isPalUtil() // to find out whether num is // palindrome or not function isPal($num) { // If num is negative, // make it positive if ($num <0) $num = (-$num); // Create a separate copy of // num, so that modifications // made to address dupNum // don't change the input number. $dupNum = ($num); // *dupNum = num return isPalUtil($num, $dupNum); } // Driver Code $n = 12321; if(isPal($n) == 0) echo 'Yes
'; else echo 'No
'; $n = 12; if(isPal($n) == 0) echo 'Yes
'; else echo 'No
'; $n = 88; if(isPal($n) == 1) echo 'Yes
'; else echo 'No
'; $n = 8999; if(isPal($n) == 0) echo 'Yes
'; else echo 'No
'; // This code is contributed by m_kit ?>> |
>
>Produktion
Yes No Yes No>
Tidskompleksitet: O(log n)
Hjælpeplads: O(log n)
At kontrollere et tal er palindrom eller ej uden at bruge noget ekstra mellemrum
Metode 2: Brug af string() metode
- Når antallet af cifre i dette nummer overstiger 1018, kan vi ikke tage det tal som et heltal, da rækken af lang lang int ikke opfylder det givne tal.
- Så tag input som en streng, kør en løkke fra start til længde/2 og tjek det første tegn (numerisk) til det sidste tegn i strengen og det næstsidste, og så videre .... Hvis et tegn ikke stemmer overens, vil strengen ville ikke være et palindrom.
Nedenfor er implementeringen af ovenstående tilgang
C++14
// C++ implementation of the above approach> #include> using> namespace> std;> > // Function to check palindrome> int> checkPalindrome(string str)> {> >// Calculating string length> >int> len = str.length();> > >// Traversing through the string> >// upto half its length> >for> (>int> i = 0; i // Comparing i th character // from starting and len-i // th character from end if (str[i] != str[len - i - 1]) return false; } // If the above loop doesn't return then it is // palindrome return true; } // Driver Code int main() { // taking number as string string st = '112233445566778899000000998877665544332211'; if (checkPalindrome(st) == true) cout << 'Yes'; else cout << 'No'; return 0; } // this code is written by vikkycirus> |
>
>
Java
// Java implementation of the above approach> import> java.io.*;> > class> GFG{> > // Function to check palindrome> static> boolean> checkPalindrome(String str)> {> > >// Calculating string length> >int> len = str.length();> > >// Traversing through the string> >// upto half its length> >for>(>int> i =>0>; i 2; i++) { // Comparing i th character // from starting and len-i // th character from end if (str.charAt(i) != str.charAt(len - i - 1)) return false; } // If the above loop doesn't return then // it is palindrome return true; } // Driver Code public static void main(String[] args) { // Taking number as string String st = '112233445566778899000000998877665544332211'; if (checkPalindrome(st) == true) System.out.print('Yes'); else System.out.print('No'); } } // This code is contributed by subhammahato348> |
>
>
Python3
# Python3 implementation of the above approach> > # function to check palindrome> def> checkPalindrome(>str>):> > ># Run loop from 0 to len/2> >for> i>in> range>(>0>,>len>(>str>)>/>/>2>):> >if> str>[i] !>=> str>[>len>(>str>)>->i>->1>]:> >return> False> > ># If the above loop doesn't> >#return then it is palindrome> >return> True> > > # Driver code> st>=> '112233445566778899000000998877665544332211'> if>(checkPalindrome(st)>=>=> True>):> >print>(>'it is a palindrome'>)> else>:> >print>(>'It is not a palindrome'>)> |
>
websteder som bedpage
>
C#
// C# implementation of the above approach> using> System;> > class> GFG{> > // Function to check palindrome> static> bool> checkPalindrome(>string> str)> {> > >// Calculating string length> >int> len = str.Length;> > >// Traversing through the string> >// upto half its length> >for>(>int> i = 0; i { // Comparing i th character // from starting and len-i // th character from end if (str[i] != str[len - i - 1]) return false; } // If the above loop doesn't return then // it is palindrome return true; } // Driver Code public static void Main() { // Taking number as string string st = '112233445566778899000000998877665544332211'; if (checkPalindrome(st) == true) Console.Write('Yes'); else Console.Write('No'); } } // This code is contributed by subhammahato348> |
>
>
Javascript
> > // Javascript implementation of the above approach> > // Function to check palindrome> function> checkPalindrome(str)> {> >// Calculating string length> >var> len = str.length;> > >// Traversing through the string> >// upto half its length> >for> (>var> i = 0; i // Comparing ith character // from starting and len-ith // character from end if (str[i] != str[len - i - 1]) return false; } // If the above loop doesn't return then it is // palindrome return true; } // Driver Code // taking number as string let st = '112233445566778899000000998877665544332211'; if (checkPalindrome(st) == true) document.write('Yes'); else document.write('No'); // This code is contributed by Mayank Tyagi> |
>
>Produktion
Yes>
Tidskompleksitet: O(|str|)
Hjælpeplads : O(1)
Metode 3:
Her er den enkleste metode til at kontrollere, om et tal er palindrom eller ej. Denne tilgang kan bruges, når antallet af cifre i det givne tal er mindre end 10^18, fordi hvis antallet af cifre i dette tal overstiger 10^18, kan vi ikke tage det tal som et heltal, da rækken af lange lange int opfylder ikke det givne tal.
For at kontrollere, om det givne tal er palindrom eller ej, vil vi bare vende cifrene i det givne tal og kontrollere, om det omvendte tal er lig med det oprindelige tal eller ej. Hvis omvendt tal er lig med det tal, vil tallet være palindrom, ellers vil det ikke være et palindrom.
C++
// C++ program to check if a number is Palindrome> #include> using> namespace> std;> // Function to check Palindrome> bool> checkPalindrome(>int> n)> {> >int> reverse = 0;> >int> temp = n;> >while> (temp != 0) {> >reverse = (reverse * 10) + (temp % 10);> >temp = temp / 10;> >}> >return> (reverse> >== n);>// if it is true then it will return 1;> >// else if false it will return 0;> }> int> main()> {> >int> n = 7007;> >if> (checkPalindrome(n) == 1) {> >cout <<>'Yes
'>;> >}> >else> {> >cout <<>'No
'>;> >}> >return> 0;> }> // This code is contributed by Suruchi Kumari> |
>
>
Java
/*package whatever //do not write package name here */> > import> java.io.*;> > class> GFG {> >// Java program to check if a number is Palindrome> > >// Function to check Palindrome> >static> boolean> checkPalindrome(>int> n)> >{> >int> reverse =>0>;> >int> temp = n;> >while> (temp !=>0>) {> >reverse = (reverse *>10>) + (temp %>10>);> >temp = temp />10>;> >}> >return> (reverse == n);>// if it is true then it will return 1;> >// else if false it will return 0;> >}> > >// Driver Code> >public> static> void> main(String args[])> >{> >int> n =>7007>;> >if> (checkPalindrome(n) ==>true>) {> >System.out.println(>'Yes'>);> >}> >else> {> >System.out.println(>'No'>);> >}> >}> }> > // This code is contributed by shinjanpatra> |
>
>
Python3
# Python3 program to check if a number is Palindrome> > # Function to check Palindrome> def> checkPalindrome(n):> > >reverse>=> 0> >temp>=> n> >while> (temp !>=> 0>):> >reverse>=> (reverse>*> 10>)>+> (temp>%> 10>)> >temp>=> temp>/>/> 10> > >return> (reverse>=>=> n)># if it is true then it will return 1;> ># else if false it will return 0;> > # driver code> n>=> 7007> if> (checkPalindrome(n)>=>=> 1>):> >print>(>'Yes'>)> > else>:> >print>(>'No'>)> > # This code is contributed by shinjanpatra> |
>
>
C#
// C# program to check if a number is Palindrome> > using> System;> > class> GFG {> > >// Function to check Palindrome> >static> bool> checkPalindrome(>int> n)> >{> >int> reverse = 0;> >int> temp = n;> >while> (temp != 0) {> >reverse = (reverse * 10) + (temp % 10);> >temp = temp / 10;> >}> >return> (> >reverse> >== n);>// if it is true then it will return 1;> >// else if false it will return 0;> >}> > >// Driver Code> >public> static> void> Main(>string>[] args)> >{> >int> n = 7007;> >if> (checkPalindrome(n) ==>true>) {> >Console.WriteLine(>'Yes'>);> >}> >else> {> >Console.WriteLine(>'No'>);> >}> >}> }> > // This code is contributed by phasing17> |
>
>
Javascript
> > // JavaScript program to check if a number is Palindrome> > // Function to check Palindrome> function> checkPalindrome(n)> {> >let reverse = 0;> >let temp = n;> >while> (temp != 0) {> >reverse = (reverse * 10) + (temp % 10);> >temp = Math.floor(temp / 10);> >}> >return> (reverse == n);>// if it is true then it will return 1;> >// else if false it will return 0;> }> > // driver code> > let n = 7007;> if> (checkPalindrome(n) == 1) {> >document.write(>'Yes'>,>''>);> }> else> {> >document.write(>'No'>,>''>);> }> > > // This code is contributed by shinjanpatra> > > |
>
>Produktion
Yes>
Tidskompleksitet: O(log10(n)) eller O(antal cifre i et givet tal)
Hjælpeplads : O(1) eller konstant
Denne artikel er udarbejdet afAshish Barnwal.